MIL-PRF-19500/302C
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section does not
include documents cited in other sections of this specification or recommended for additional information or as examples. While
every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements documents cited in section 3 and 4 of this specification, whether or not they are listed.
2.1.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of
the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see
6.2).
SPECIFICATION
DEPARTMENT OF DEFENSE
MIL-PRF-19500
- Semiconductor Devices, General Specification for.
STANDARD
MILITARY
MIL-STD-750
- Test Methods for Semiconductor Devices.
(Unless otherwise indicated, copies of the above specifications, standards, and handbooks are available from the Defense
Automated Printing Service, Building 4D (DPM-DODSSP), 700 Robbins Avenue, Philadelphia, PA 19111-5094.)
2.2 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein (except
for associated detail specifications, specification sheets or MS standards), the text of this specification takes precedence. Nothing
in this specification, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Associated specification. The individual item requirements shall be in accordance with MIL-PRF-19500, and as specified
herein.
3.2 Abbreviations, symbols, and definitions. Abbreviations, symbols, and definitions used herein shall be as specified in MIL-
PRF-19500.
3.3 Interface requirements and physical dimensions. The Interface requirements and physical dimensions shall be as specified
in MIL-PRF-19500 and figure 1 (similar to T0-72).
3.3.1 Lead finish. Lead finish shall be solderable in accordance with MIL-PRF-19500. Where a choice of lead finish is desired,
it shall be specified in the contract or purchase order (see 6.2).
3.4 Marking. Marking shall be in accordance with MIL-PRF-19500.
3.5 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are as
specified in 1.3, 1.4, and table I herein.
3.6 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table I herein.
3.7 Qualification. Devices furnished under this specification shall be products that are authorized by the qualifying activity for
listing on the applicable qualified manufacturer's list before contract award (see 4.2 and 6.3 ).
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business