MIL-PRF-19500 Semiconductor Devices, General Specification ForThis specification establishes the general performance requirements for semiconductor devices. Product assurance is provided by effective screening, conformance inspection, and process controls to mitigate risk. Mission assurance and standardization of parts are the highest priorities. This specification establishes a heritage program of semiconductor devices the military and space community can rely on to be dependable and available. Detail requirements and characteristics are specified in the specification sheets. Revisions to this specification and specification sheets are structured to assure the interchangeability of devices of the same part type regardless of manufacturing date code or conformance inspection \(CI\) completion date. Four quality levels for encapsulated devices are provided for in this specification, differentiated by the prefixes JAN, JANTX, JANTXV, and JANS. Eight radiation hardness assurance \(RHA\) levels are provided for the JANTXV and JANS quality levels. These are designated by the letters M, D, P, L, R, F, G, and H following the quality level portion of the prefix. Two quality levels for unencapsulated devices are provided for in this specification, differentiated by the prefixes JANHC and JANKC.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16

MIL-PRF-19500P

APPENDIX C

QUALITY MANAGEMENT PROGRAM

C.1 SCOPE

C.1.1 Scope. This appendix outlines a Quality Management (QM) program and has been prepared to allow

manufacturers to produce high quality, reliable military discrete semiconductors under one quality system utilizing

best commercial practices. However, manufacturers who choose to participate shall be fully complaint to appendix D

and shall implement a Technical Review Board (TRB), and conduct product quality planning. Manufacturers with a

certified QM program will be approved by the qualifying activity to pursue process and test optimization. This level

gives unique flexibility to applicable suppliers. A qualified manufacturer is a supplier who is compliant to this

appendix and who exercises a system which focuses on the manufacturing process and technology capability. The

DLA Land and Maritime audit is process oriented. This appendix is a mandatory part of the specification. The

information contained herein is intended for compliance.

C.2 APPLICABLE DOCUMENTS

C.2.1 General. The documents listed in this section are specified in sections C.3, C.4, or C.8 of this specification.

This section does not include documents cited in other sections of this specification or recommended for additional

information or as examples. While every effort has been made to ensure the completeness of this list, document

users are cautioned that they shall meet all specified requirements of documents cited in sections C.3, C.4, or C.8 of

this specification, whether or not they are listed.

C.2.2 Non-Government publications. The following documents form a part of this document to the extent specified

herein. Unless otherwise specified, the issues of the documents are those cited in the solicitation or contract.

TECHAMERICA

EIA-557

Statistical Process Control Systems.

JEP-121

Guidelines for MIL-STD-883 Screening and QCI Optimization.

(Application for copies should be addressed to the Electronic Industries Alliance, 2500 Wilson Boulevard, Arlington

VA 22201-3834, www.jedec.org.)

(Non-Government standards and other publications are normally available from the organizations which prepare or

distribute the documents. These documents also may be available in or through libraries or other informational

services.)

C.2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited

herein (except for related specification sheets), the text of this document takes precedence. Nothing in this

document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

C.3. QUALITY MANAGEMENT (QM) PROGRAM

C.3.1 QM approach. A program that embodies the principles of total quality management (TQM) will be developed

and implemented by the manufacturer and documented in the QM plan. This is a management approach that is

applied over the life cycle of the product to provide visibility and control of the functional and physical characteristics

of devices marked with the JAN designator.