MIL-PRF-19500 Semiconductor Devices, General Specification ForThis specification establishes the general performance requirements for semiconductor devices. Product assurance is provided by effective screening, conformance inspection, and process controls to mitigate risk. Mission assurance and standardization of parts are the highest priorities. This specification establishes a heritage program of semiconductor devices the military and space community can rely on to be dependable and available. Detail requirements and characteristics are specified in the specification sheets. Revisions to this specification and specification sheets are structured to assure the interchangeability of devices of the same part type regardless of manufacturing date code or conformance inspection \(CI\) completion date. Four quality levels for encapsulated devices are provided for in this specification, differentiated by the prefixes JAN, JANTX, JANTXV, and JANS. Eight radiation hardness assurance \(RHA\) levels are provided for the JANTXV and JANS quality levels. These are designated by the letters M, D, P, L, R, F, G, and H following the quality level portion of the prefix. Two quality levels for unencapsulated devices are provided for in this specification, differentiated by the prefixes JANHC and JANKC.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16

MIL-PRF-19500P

APPENDIX E

STANDARD VERIFICATION SYSTEM FOR QUALIFED PRODUCTS

E.1 SCOPE

E.1.1 Scope. This appendix contains the standard verification system which, when performed in its entirety,

assures that the product will meet the performance requirements. This program also measures and evaluates the

manufacturer's manufacturing process against a baseline for that process. This baseline can include innovative and

improved processes that result in an equivalent or higher quality product, provided that the process used to evaluate

and document these changes have been reviewed and approved by the qualifying activity. Changes to the process

baseline can be made by the manufacturer after achieving approval with documented reliability and quality data. The

approach outlined in this appendix is a proven baseline, which contains details of the screening and conformance

inspection (CI) procedures. (See tables E-I through E-X.) However, manufacturers shall demonstrate to the

qualifying activity, a system that achieves at least the same level of quality as could be achieved by complying with

this appendix. This appendix is a mandatory part of the specification. The information contained herein is intended

for compliance.

E.2 APPLICABLE DOCUMENTS

E.2.1 General. The documents listed in this section are specified in sections E.3 and E.6 of this specification. This

section does not include documents cited in other sections of this specification or recommended for additional

information or as examples. While every effort has been made to ensure the completeness of this list, document

users are cautioned that they shall meet all specified requirements of documents cited in sections E.3 and E.6 of this

specification, whether or not they are listed.

E.2.2 Non-Government publications. The following documents form a part of this document to the extent specified

herein. Unless otherwise specified, the issues of the documents are those cited in the solicitation or contract.

AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)

ANSI/NCSL-Z540-1

Calibration Laboratories and Measuring and Test Equipment - General

Requirements.

(Application for copies should be addressed to the American National Standards Institute, 1819 L Street NW, Suite

600, Washington D.C. 20036, www.ansi.org.)

(Non-Government standards and other publications are normally available from the organizations which prepare or

distribute the documents. These documents also may be available in or through libraries or other informational

services.)

E.2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited

herein (except for related specification sheets), the text of this document takes precedence. Nothing in this

document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.