INCH-POUND
The documentation and process conversion measures
necessary to comply with this document shall be
MIL-PRF-19500/516F
completed by 7 September 2011.
7 June 2011
SUPERSEDING
MIL-PRF-19500/516E
5 June 2009
PERFORMANCE SPECIFICATION SHEET
* SEMICONDUCTOR DEVICE, DIODE SILICON, BIPOLAR TRANSIENT VOLTAGE
SUPPRESSOR, TYPES 1N6102 THROUGH 1N6137, 1N6102A THROUGH 1N6137A, 1N6138
THROUGH 1N6173, 1N6138A THROUGH 1N6173A, 1N6102US THROUGH 1N6137US, 1N6102AUS
THROUGH 1N6137AUS, 1N6138US THROUGH 1N6173US, 1N6138AUS THROUGH 1N6173AUS,
1N6102URS THROUGH 1N6137URS, 1N6102AURS THROUGH 1N6137AURS, 1N6138URS THROUGH
1N6173URS, 1N6138AURS THROUGH 1N6173AURS, JAN, JANTX, JANTXV, JANS, JANHC, AND JANKC
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein
shall consist of this specification sheet and MIL-PRF-19500.
1. SCOPE
1.1 Scope. This specification covers the performance requirements for bipolar 500 watt and 1,500 watt peak pulse
power transient voltage suppressor diodes. Four levels of product assurance are provided for each device type as
specified in MIL-PRF-19500. Two levels of product assurance are provided for die. The suffix "A" denotes a five
percent voltage tolerance.
* 1.2 Physical dimensions. See figure 1, figure 2 (US), figure 3 (URS), and figures 4 and 5 (die) herein.
* 1.3 Maximum ratings. Maximum ratings are as shown in columns 4, 6, and 7 of the electrical characteristics table
herein and as follows:
a. PR = 2 W (for 500 W peak pulse power devices) and 3 W (for 1,500 W peak pulse power devices) at TA =
+25°C (see figure 6 for derating).
b. PR = 3 W (for 500 W peak pulse power devices) and 5 W (for 1,500 W peak pulse power devices) at TL =
+75°C for L = 0.375 inch (9.53 mm) (see figure 7).
c. PPR = 500 W (1N6102 through 1N6137 (including A, US, and URS suffix versions)) and 1,500 W (1N6138
through 1N6173 (including A, US, and URS suffix versions)) at tp = 1 ms (see figure 8).
d. -55°C ≤ TOP ≤ +175°C, -55°C ≤ TSTG ≤ +175°C (ambient temperatures).
1.4 Primary electrical characteristics. Primary electrical characteristics are as shown in columns 2 and 4 of the
electrical characteristics table herein.
* Comments, suggestions, or questions on this document should be addressed to DLA Land and Maritime, ATTN:
VAC, P.O. Box 3990, Columbus, OH 43218-3990, or emailed to Semiconductor@dla.mil. Since contact information
can change, you may want to verify the currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 5961
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business