For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

MIL-PRF-19500-435 Semiconductor Device, Diode, Silicon, Low-Noise Voltage Regulator, Types 1N4099-1 Through 1N4135-1, 1N4614-1 Through 1N4627-1, 1N4099Ur-1 Through 1N4135Ur-1, 1N4614Ur-1 Through 1N4627Ur-1, \(Ub, Ub2, Ub2R, Ubca, Ubd, And Ubcc\), C And D Tolerance Suffix Devices, Jan, Jantx, Jantxv, Jans, Janhc, And JankcThis specification covers the performance requirements for 500 milliwatt, silicon, low-noise, voltage regulator diodes with voltage tolerances of 5 percent, 2 percent, and 1 percent. Four levels of product assurance are provided for each encapsulated device type as specified in MIL-PRF-19500, and two levels of product assurance for each unencapsulated device type \(die\). For JANHC and JANKC quality levels see 6.5.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15


. . . . . . . . . .
MIL-PRF-19500/435M
4.4 Conformance inspection. Conformance inspection shall be in accordance with MIL-PRF-19500, and as
specified herein.
4.4.1 Group A inspection. Group A inspection shall be conducted in accordance with appendix E, table E-V of
MIL-PRF-19500. End-point electrical measurements shall be in accordance with table I, subgroup 2 herein.
4.4.2 Group B inspection. Group B inspection shall be conducted in accordance with the conditions specified for
subgroup testing in appendix E, table E-VIa (JANS) and table E-VIb (JAN, JANTX, and JANTXV) of MIL-PRF-19500
and herein. Electrical measurements (end-points) requirements shall be in accordance with table I, subgroup 2
herein.
4.4.2.1 Group B inspection, appendix E, table E-VIa (JANS) of MIL-PRF-19500.
Subgroup
Method
Condition
B3
2101
Decap analysis scribe and break only.
B4
1037
2,000 cycles
B5
1027
IZM = column 10 of table III minimum for 1,000 hours; adjust IZ or TA to achieve
TJ = +175°C minimum. Marking legibility requirements shall not apply.
RθJEC = 100°C/W (max) at zero lead length (DO-213AA), +25°C ≤ TR ≤ +35°C
*
B6
3101 or
(see 4.5.4). RθJL = 250°C/W (max) at L = .375 inch (9.53 mm), (DO-35). RθJL and
4081
RθJEC only.
4.4.2.2 Group B inspection, appendix E, table E-VIb (JAN, JANTX, JANTXV) of MIL-PRF-19500.
Subgroup
Method
Condition
0°C to +100°C, 10 cycles.
B2
1056
-55°C to +175°C, 25 cycles.
B2
1051
B3
1027
IZM = column 10 of table III herein minimum. Adjust IZ or TA to ensure a
TJ = +150°C (min).
B4
2101
Decap analysis scribe and break only.
B5
Not applicable.
TA = +175°C.
B6
1032
11



For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.