MIL-PRF-19500/563G
5. PACKAGING
* 5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order
(see 6.2). When packaging of materiel is to be performed by DoD personnel, these personnel need to contact the
responsible packaging activity to ascertain requisite packaging requirements. Packaging requirements are maintained
by the Inventory Control Points' packaging activity within the Military Department or Defense Agency, or within the
Military Departments' System Command. Packaging data retrieval is available from the managing Military
Departments' or Defense Agency's automated packaging files, CD-ROM products, or by contacting the responsible
packaging activity.
6. NOTES
* (This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.
The notes specified in MIL-PRF-19500 are applicable to this specification.)
* 6.1 Intended use. Semiconductors conforming to this specification are intended for original equipment design
applications and logistic support of existing equipment.
* 6.2 Acquisition requirements. Acquisition documents should specify the following:
a.
Title, number, and date of this specification.
b.
Packaging requirements (see 5.1).
c.
Lead material and finish (see 3.4.1).
d.
Product assurance level and type designator.
* 6.3 Qualification. With respect to products requiring qualification, awards will be made only for products which are,
at the time of award of contract, qualified for inclusion in Qualified Manufacturers List (QML 19500) whether or not
such products have actually been so listed by that date. The attention of the contractors is called to these
requirements, and manufacturers are urged to arrange to have the products that they propose to offer to the Federal
Government tested for qualification in order that they may be eligible to be awarded contracts or orders for the
products covered by this specification. Information pertaining to qualification of products may be obtained from DLA
Land and Maritime, ATTN: VQE, P.O. Box 3990, Columbus, OH 43218-3990 or e-mail vqe.chief@dla.mil. An online
listing of products qualified to this specification may be found in the Qualified Products Database (QPD) at
6.4 Cross-reference and complement list. Parts from this specification may be used to replace the following
commercial Part or Identifying Number (PIN's). The term PIN is equivalent to the term part number which was
previously used in this specification.
Preferred types
Commercial types (1)
2N6845
IRFF9120, IRFF9121, IRFF9122, IRFF9123
2N6847
IRFF9220, IRFF9221, IRFF9222, IRFF9223
2N6845U
IRFE9120, IRFE9121, IRFE9132, IRFE9123
2N6847U
IRFE9220, IRFE9221, IRFE9222, IRFE9223
6.5 Suppliers of JANHC and JANKC die. The qualified die suppliers with the applicable letter version (example,
JANHCA2N6845) will be identified on the QML.
20
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business