MIL-PRF-19500/429N
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order
(see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel
need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are
maintained by the Inventory Control Point's packaging activities within the Military Service or Defense Agency, or
within the Military Service's system commands. Packaging data retrieval is available from the managing Military
Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the responsible
packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.
The notes specified in MIL-PRF-19500 are applicable to this specification.)
6.1 Intended use. Semiconductors conforming to this specification are intended for original equipment design
applications and logistic support of existing equipment.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number, and date of this specification.
b. Packaging requirements (see 5.1).
c. Lead finish (see 3.4.1).
d. The complete Part or Identifying Number (PIN), see title and section 1.
6.3 Qualification. With respect to products requiring qualification, awards will be made only for products which are,
at the time of award of contract, qualified for inclusion in Qualified Manufacturers List (QML 19500) whether or not
such products have actually been so listed by that date. The attention of the contractors is called to these
requirements, and manufacturers are urged to arrange to have the products that they propose to offer to the Federal
Government tested for qualification in order that they may be eligible to be awarded contracts or orders for the
products covered by this specification. Information pertaining to qualification of products may be obtained from DLA
Land and Maritime, ATTN: VQE, P.O. Box 3990, Columbus, OH 43218-3990 or e-mail vqe.chief@dla.mil. An online
listing of products qualified to this specification may be found in the Qualified Products Database (QPD) at
6.4 Suppliers of die. The qualified die suppliers with the applicable letter version (e.g., JANHCA1N5615) will be
identified on the Qualified Manufacturers List (QML).
JANHC and JANKC ordering information
PIN
Manufacturer
14552
33178
1N5615
JANHCA1N5615
JANHCB1N5615
JANKCA1N5615
JANKCB1N5615
1N5617
JANHCA1N5617
JANHCB1N5617
JANKCA1N5617
JANKCB1N5617
1N5619
JANHCA1N5619
JANHCB1N5619
JANKCA1N5619
JANKCB1N5619
1N5621
JANHCA1N5621
JANHCB1N5621
JANKCA1N5621
JANKCB1N5621
1N5623
JANHCA1N5623
JANHCB1N5623
JANKCA1N5623
JANKCB1N5623
20
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business